K-TEK液位計 07-T1051 華東特惠

更新時間：2021-01-25

瀏覽次數：1460

K-TEK液位計 07-T1051 華東特惠

K-TEK is a premier manufacturer of precision metal stampings and sheet metal fabrications. For almost 40 years K-TEK has exceeded customer expectations in the manufacturing of stampings, weldments, mechanical assemblies, and wire forms. K-TEK works with a variety of OEM customers both domestically and internationally. K-TEK has two locations strategically located to serve the domestic manufacturing centers. K-TEK Wisconson is located in Baldwin Wisconsin just a short drive outside of the Minneapolis-St. Paul metro area, focusing on the Midwest. K-TEK Carolina in Charlotte North Carolina is centrally located to serve the growing Southeast market. Our highly trained, experienced staff is ready to assist you on your next project. Please contact us for a quick, competitive quotation.

We have expertise in all forms of welding

MIG – Can be used for many times of metals and is well suited for long welds and thick sections. Can be performed in any orientation and requires little post-weld cleanup.

TIG – Clean, high quality welds with little distortion but slower and less suited for thick sections than MIG welding.

Robotic – Faster, more precise welds with greater consistency and quality.

Spot Welding - We have automatic nut feeders for M6, M8, and M10.

射頻導納料位計的工作原理介紹：點位射頻導納技術與電容技術的重要區別是采用了三端技術。在電路單元測量信號上引出一根線，經同相放大器放大，其輸出與同軸電纜屏蔽層相連，然后連接到探頭的屏蔽層上。該放大器是一個同相放大器，其增益為“1”，輸出信號與輸入信號等電位，同相位，同頻率，但互相隔離。地線是電纜中外面的屏蔽層。由于同軸電纜的中心線與中間屏蔽存在上述關系，所以二者之間沒有電位差，也就沒有電流流過，即沒有電流從中心線漏出來，相當于二者之間沒有電容或者說電容為零。因此電纜的溫度效應，安裝電容等也就不會產生影響。對于探頭上的掛料問題，采用一種新的探頭結構，五層同心結構：里層是中心測桿，中間是中心屏蔽層，外邊是接地的安裝螺紋，用絕緣層將其分別隔離開來。

與同軸電纜的情況是一樣的，中心測桿與屏蔽層之間沒有電勢差，即使傳感元件上掛料阻抗很小，也不會有電流流過，電子儀器測量的僅僅是從探頭中心到對面罐壁的電流，因?yàn)橹行脑茏璧K電流沿探頭向上流向容器壁，因而對地電流只有經探頭末端通過被測物料到對面容器。即Ua=Ub lab=(Ua－Ub)/R=0。由于屏蔽層與容器壁之間存在電勢差，兩者之間雖有電流流過，但是該電流不被測量，不影響測量結果。這樣就將測量端保護起來，不受掛料的影響。只有容器中的物位確實上升接觸到中心測量桿時，通過被測物料，中心測桿與地之間形成被測電流。
供應美國K-TEK導波雷達料位變送器、K-TEK液位計開關、K-TEK激光變送器、K-TEK開關等產品。美國K-TEK公司是一家以“磁技術”著稱于世的專業物位儀表生產廠商。她成立于1975年，目標是為的用戶提供“”的產品。K-TEK物位家族產品，在工業中有廣泛應用：油氣生產、加油站、石油化工、電力工業、化工儲罐、凈水和廢水處理、冶金工業、造紙業、食品加工及制藥業。K-TEK產品有K-TEK km26磁翻板、K-TEK AT100磁致伸縮、K-TEK MT2000導波雷達、K-TEK LS外浮筒液位開關、K-TEK RF射頻導納、K-TEK超聲波、K-TEK激光、K-TEK音叉、K-TEK熱擴散、K-TEK阻旋、K-TEK重錘、K-TEK MS50浮子式開關。

K-TEK液位計 07-T1051 華東特惠

上一篇：70APLR0001溫度變送器北京現貨中
下一篇：世偉洛克球閥SS-45XS12MM貨期短